06 June 2022
11:00 - 13:00
Add
Mechanics of wood and biocomposites in engineering I
Minisymposium organized by Ani Khaloian, Markus Lukacevic and Jan-Willem van de Kuilen
|
MS21A
Room: A1 – 1
Chair: Markus Lukacevic
CoChair: Ani Khaloian
|
Asymptotic homogenization of the effective hygro-elastic response of oak based on microscopic images
Mohammadamin Livani, Emanuela Bosco and Akke.S.J Suiker
Computed tomography-based modelling of moisture transport and hygro-mechanical behaviour of sawn timber during kiln drying
Sara Florisson, Lars Hansson, Johannes Huber, José Couceiro and Dick Sandberg
Micromechanics of biocomposites: Stiffness upscaling from cellulose nanofibrils to natural fibers and their composites
Markus Königsberger, Markus Lukacevic and Josef Füssl
Predicting the mechanical behaviour of a natural composite: the flax fibre
Emmanuelle Richely, Hom Dhakal, Zhongyi Zhang, Johnny Beaugrand and Sofiane Guessasma
|
06 June 2022
14:00 - 16:00
Add
Mechanics of wood and biocomposites in engineering II
Minisymposium organized by Ani Khaloian, Markus Lukacevic and Jan-Willem van de Kuilen
|
MS21B
Room: A1 – 1
Chair: Catharina Czech
CoChair: Taoyi Yu
|
Phase Field Method-based Modeling of Fracture in Wood
Sebastian Pech, Markus Lukacevic and Josef Füss
Numerical simulation of moisture-induced cracking in wood exposed to indoor climate conditions
Florian Brandstätter, Maximilian Autengruber, Markus Lukacevic and Josef Füssl
Failure modeling of wood based on local material properties
Franziska Seeber
Constitutive model for the analysis of the behavior and mechanics of wood damage
Roberto E. Quinteros-Mayne, Ignacio de Artega Jorda and José M. Cabrero
A comparative study of materials models for solid and laminated birch wood over wide ranges of strain, strain-rate and temperature
Georg Baumann, Ulrich Müller, Reinhard Brandner and Florian Feist
Development of a 3D visco-elastic model for wood under large deformations
Raúl Lazo-Molina, Carlos Felipe Guzmán, Juan Carlos Pina, Erick I. Saavedra Flores and Sergio J. Yanez
|
06 June 2022
16:30 - 18:30
Add
Mechanics of wood and biocomposites in engineering III
Minisymposium organized by Ani Khaloian, Markus Lukacevic and Jan-Willem van de Kuilen
|
MS21C
Room: A1 – 1
Chair: Markus Königsberger
CoChair: Ani Khaloian
|
Complex finite element simulations of linear Hardwood cutting
František Šebek, Petr Kubík, Jan Tippner, Martin Brabec and Ondřej Dvořáček
Numerical analysis of rotational machining of hardwood
Petr Kubík, František Šebek, Ondřej Dvořáček, Martin Brabec and Jan Tippner
Numerical Analysis of Cross-Laminated Timber Connections with Mechanical Fasteners using a Beam-on-Foundation Model
Joan W. Gikonyo, Michael Schweigler and Thomas K. Bader
Analysis of residual stress in curved glulam beams considering material uncertainties
Taoyi Yu, Ani Khaloian and Jan-Willem van de Kuilen
Modeling approach to estimate the bending strength and height effect of glued laminated timber beams
Christoffer Vida, Markus Lukacevic and Josef Füssl
Integrated approach for modeling post-tension loss in mass-timber panel buildings
Ryan P. Longman Longman, Esther J. Baas, John A. Nairn, Lech Muszyński, Mariapaola Riggio, André R. Barbosa and Gabriele Granello
An anisotropic elastic constitutive model for wood with hygroscopic swelling in infinite strains
Winston Mmari and Björn Johannesson
|
07 June 2022
11:00 - 13:00
Add
Mechanics of wood and biocomposites in engineering IV
Minisymposium organized by Ani Khaloian, Markus Lukacevic and Jan-Willem van de Kuilen
|
MS21D
Room: A1 – 1
Chair: Markus Lukacevic
CoChair: Franziska Seeber
|
Quantification of spatial inhomogeneous material properties: Wooden laser scanned fibre deviations modelled by Gaussian processes
Catharina Czech, Franziska Seeber, Fabian Duddeck and Ani Khaloian Sarnaghi
Parameter identification for a cross-laminated timber slab by Bayesian inference
Michael Kawrza, Thomas Furtmüller and Christoph Adam
Generation of artificial timber boards with realistic appearance for application of deep-learning algorithms in the wood manufacturing industry
Tadios Habite, Anders Olsson and Osama Abdeljaber
Multi-objective optimization for understanding tree design rules with finite element modelling.
Ezequiel Moreno-Zapata, José M. Cabrero-Ballarín, Germán Ramos-Ruiz and Gustavo Vargas-Silva
Finite element analysis of natural fibre composites under impact loading
Simonetta Boria, Giulia Del Bianco and Valentina Giammaria
A micromechanics-informed beam model of growing wood structures
Antonia Wagner and Stefan Scheiner
|